Please use this identifier to cite or link to this item:
http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/10115
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yanushiya, J. | - |
dc.contributor.author | Thusalini, A. | - |
dc.contributor.author | Kannan, N. | - |
dc.date.accessioned | 2024-02-19T03:10:27Z | - |
dc.date.available | 2024-02-19T03:10:27Z | - |
dc.date.issued | 2024 | - |
dc.identifier.citation | Jeganathan, Y., Asharp, T., & Nadarajah, K. (2024). Adsorptive behavior of engineered biochar/hydrochar for tetracycline removal from synthetic wastewater. Environmental Pollution, 123452. | en_US |
dc.identifier.uri | http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/10115 | - |
dc.description.abstract | In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents. Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (qe in mg/g). After selecting the best qe values for both biochar and hydrochar, both materials were modified using 20% H3PO4. A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher qe value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo- second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and interaction, whereas cation exchange, mass diffusion, and interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier | en_US |
dc.subject | Engineered biochar | en_US |
dc.subject | Engineered hydrochar | en_US |
dc.subject | H (3) PO (4) | en_US |
dc.subject | Isotherm | en_US |
dc.subject | Kinetics | en_US |
dc.subject | Paddy husk | en_US |
dc.subject | Tetracycline | en_US |
dc.subject | Thermodynamics | en_US |
dc.subject | Wastewater irrigation | en_US |
dc.title | Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater | en_US |
dc.type | Article | en_US |
Appears in Collections: | Agricultural Engineering |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Adsorptive behavior of engineered biochar hydrochar for tetracycline removal from synthetic..pdf | 113.56 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.