Please use this identifier to cite or link to this item: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2446
Title: Investigations of RF Magnetron Sputtered Cu2ZnSnS4 (CZTS) Absorber Layer Using X-ray Photoelectron Spectroscopy for Thin Film Solar Cell
Authors: Balaji, G.
Balasundaraprabhu, R.
Prasanna, S.
Prabavathy, N.
McIlroy, D. N.
Sivakumaran, K.
Kannan, M. D.
Velauthapillai, Dhayalan
Issue Date: 2019
Publisher: University of Jaffna
Abstract: Cu2ZnSnS4 (CZTS), a quaternary compound semiconductor, is an earth abundant and sustainable semiconductor material that is used as an absorber layer for thin film solar cells. In the present work, CZTS thin films were deposited onto soda lime glass (SLG) substrates by RF magnetron sputtering using the stacking sequence CuS / ZnS / SnS at a substrate temperature of 300⁰C. The samples were then sulphurised at 400⁰C in H2S atmosphere for 60 min. A comparison of as-deposited and sulphurised CZTS thin films are discussed in this paper. The composition of the CZTS thin film samples were studied using X-ray photoelectron spectroscopy, which revealed the presence of Cu, Zn, Sn, S in 2:1:1:4 ratio respectively. The presence of O and C was also detected due to atmospheric contamination. It is evident from the atomic % calculation that the stoichiometry has improved for the sulphurised samples. The formation of stoichiometric CZTS is an important factor to use it as an absorber layer in a thin film solar cell. Thus, from the XPS results it is obvious that the sulphurised CZTS thin films can be used as absorber layer in a thin film solar cell.
URI: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2446
ISSN: 0925-3467
Appears in Collections:AMCEHA 2019

Files in This Item:
File Description SizeFormat 
Investigations of RF Magnetron Sputtered Cu2ZnSnS4 (CZTS) Absorber.pdf591.51 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.