Please use this identifier to cite or link to this item: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/9967
Title: Sustainable use of coco pith in cement-sand mortar for masonry block production: Mechanical characteristics, durability and environmental benefit
Authors: Sathiparan, N.
Anburuvel, A.
Madhuranya, M.
Kothalawala, D.A.I.
Keywords: Masonry blocks;Sustainability;Coco path;Durability;Ecology
Issue Date: 2022
Publisher: Elsevier
Abstract: The present study performs a comprehensive analysis that includes the assessment of mechanical and durability characteristics of cement blocks, cost-effectiveness and eco-benefit analysis of incorporating coco pith in the production of cement blocks. As coco pith is often considered waste material and dumped in landfills, the usage of coco pith in cement blocks is encouraged to promote sustainable construction practices. In this study, a total of 504 cubes (100 mm × 100 mm × 100 mm) and 24 blocks (200 mm × 100 mm × 60 mm) were prepared. The samples were tested with mortar containing 0, 4, 6 and 8% of coconut coir as a fraction of cement weight. Experimental programs conducted on fresh and hardened mortar included determining workability and setting time; physical parameters such as densities at different moisture conditions and water absorption rates; me- chanical characteristics including compressive strength at different moisture conditions and flexural tensile strength; durability aspects such as sorption, evaporation rate, resistance against wet-dry cycle, and resistance against the severe environmental condition. In addition, to evaluate the cost-benefit and sustainability of coco pith incorporation in cement-sand blocks, the material consumption, embodied energy and CO2 emission for mortar mixes production was calculated. Results showed that the inclusion of 4% coco pith in the mortar increased air-dried compressive strength by 8% compared to that of the control mortar. However, further in- crease in coco pith content decreased compressive strength. For 6% and 8% coco pith content, the decrease in compressive strength was 3% and 25%, respectively. A similar trend was observed for the flexural strength of mortar blocks. However, even for mortar with 8% coco pith content, the flexural tensile strength was higher than that of the control mortar. Higher coco pith content in mortar tended to increase water absorption and sorption by capillary action. Still, for cement mortar with 4% coco pith content, both water absorption rate and sorpitivity were within the allowable limit. When cost per unit volume per strength was considered, mortar with 4% coco pith was more beneficial as it was 11.7% lesser than that of the control mortar. When energy consumption and carbon emission per unit volume per strength were considered, mortar with 4% coco pith was more effective as it was 11.6% and 11.5% lesser than that of the control mortar, respectively. So, it is recommended to use coco pith up to 4%, which provides better mechanical characteristics and sustainable production without compromising important durability properties
URI: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/9967
DOI: https://doi.org/10.1016/j.jclepro.2022.132243
Appears in Collections:Civil Engineering



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.